Last month I had posted about the BMTC installing cycle racks to the front of their buses. I had also mentioned that the BMTC and BBMP were setting up dedicated cycle lanes across the city including a pop-up cycle lane along Outer Ring Road next to the existing pop-up bus priority lane.
Thanks to Twitter user Nihar Thakkar (@Nihart1024), I got to see some of the work being done. Here are some images and videos of the cycle lanes.
For starters, here is a cycle parking stand under the split flyover at Agara Junction on Outer Ring Road.
This is on the Service Lane of ORR near the junction of the road bound for Whitefield. You can see the under-construction section of the Purple Line bound for Whitefield.
Sadly, BBMP is using plastic reflective bollards. These bollards are pretty flexible and can easily be damaged. Someone on a joyride in the middle of the night can just mow down these bollards. I do wish, more sturdy ones or even a fence similar to the one that NHAI uses to separate the service lanes from the main carriageway on Hosur Road was used.
Work is moving at a brisk pace on both the north and south bound lanes. Hopefully markings and signage is installed soon for an effective trial. pic.twitter.com/ZBzHqPjLd0
Since the Cycle Lanes are separated by bollards, the likelihood of people parking their cars on them is limited. Also, since they are on the right hand side of the service lane, it is on the side of the road where nobody would (hopefully) park. I sincerely hope that BBMP replaces any damaged or removed bollards to prevent cars from entering these lanes and also does something to prevent motorbikes from entering these lanes. I also hope the cycle lanes don’t disappear when the road is resurfaced (as it happened in Jayanagar) and that BBMP will maintain a uniform quality for the road surface.
That being said, I hope pedestrian infrastructure is next in the pipeline.
Going a step ahead in trying to make Bangalore a friendlier city for cyclists, BMTC has installed cycle stands to the front of their buses.
Managing Director of BMTC C Shikha said that the fabrication of the stand was done by employees at BMTC’s Central workshop at Shanthinagar. In a report for Times of India, Christin Mathew Philip says that the BMTC also plans a pop-up cycle lane for 16 km between Central Silk Board and Lowry Medical College where a bus priority lane has also been marked.
Here is what the new cycle racks look like.
OMG! Just spotted a BMTC bus with a bicycle rack! The driver was really nice and let me try it out 🙂 🚴🚴 pic.twitter.com/7iAE6MImYv
This is the second time that the BMTC is experimenting with cycle racks on buses. The last time, Volvo had installed cycle racks on a few Volvo 8400 buses operated in and around Whitefield in 2011 but the experiment fizzled out after a while.
Apart from buses, Namma Metro too allows cyclists to carry their cycles on metro trains but only foldable cycles that can pass through the scanner ae allowed.
In a report for The Hindu, BMTC Chairman N.S. Nandiesha Reddy said that while 100 buses would initially be fitted with cycle stands, it would eventually be extended to the entire fleet.
Bangalore has experimented in many forms to get people to start cycling.
Between 2011 and 2012, the city partnered with Kerberon Automation to set up cycle stands across the city to promote the concept of rented cycles. Fixed cycle stands were set up in core areas (such as the Brigade Road bus stop where G-4 starts). Users would have to pay a deposit, get a smart card and then use the cycles. Around the same time, cycle lanes were made available in localities such as Jayanagar by demarcating the outermost section of major roads as cycle-only. However, these lanes were mostly used to park cars – which although a punishable offence was rarely punished. Eventually, they vanished, either after being dug up to lay utilities or when the road was resurfaced and the cycle lanes no longer marked.
By 2018, dockless cycles from private players such Yulu, Zoomcar PEDL and Ola Pedal had found a market in the city.
Let’s hope this time, the city learns from its past mistakes and promotes cycling in a big way.
P.S: If you’re planning to cycle around, do consider wearing a good mask. I’ve personally tried the 3M Aura Particulate Respirator to work well. It complies with NIOSH N-95 standards. Do check it out below. You can also try out the Savlon one if 3M masks are out of stock (which they are most of the time). Savlon is a good brand, owned by ITC (earlier Johnson and Johnson). Alternatively, you can try Wuerth, which was the first FFP1 standard mask that I tried.
Featured Image: Cycle Rack on a 500-D by Nihar Thakkar.
Amaravati, the upcoming capital of Andhra Pradesh, is touted to be a major game changer in Indian cities. While it will be the fourth major planned State Capital, after Bhubaneshwar, Chandigarh and Gandhinagar, it will be the first major Smart City in India as a State Capital.
Now, all this sure sounds rosy on paper, but fancy stuff isn’t what we’re looking for right now. What we need is functionality. Here are some key pointers that I have decided to put across for Amaravati’s transport, which will help livability in the city massively.
Theoretical Stuff
Start a new unified transit body
Create a new entity from scratch for Amaravati’s transport. That’s right. A new entity, solely for transport within the Capital Region. It can be either a Municipal-run body like BEST, or a State-run body like MTC. However, this body should be a Unified body on the lines of Transport for London [TfL] or New York’s Metropolitan Transit Authority [MTA]. Let this authority or agency handle buses, trains, and also be a nodal point for autorickshaws/taxis. The Transco can also be jointly managed by all three levels of government. Road related works can remain under existing agencies like the Public Works Department or Andhra Pradesh Road Development Corporation
Keep out of existing Establishments
Amaravati must not rely on APSRTC or Indian Railways for its Transport. Buses in Hyderabad were earlier run by the APSRTC, and now by the TSRTC. Rail transit for the new city must be independent of Indian Railways, to prevent congestion and avoid red-tapism on the network like on the Mumbai Suburban Railway. MSRTC operates inter-city buses in Mumbai. BEST operates intra-city services. The other transcos [NMMT, TMT, MBMT, et al] handle services between the different jurisdictions within the MMR. Amaravti might be made up of multiple Municipal bodies for Vijayawada, Guntur and the upcoming city, but transport within these regions must be kept for a single entity that exclusively serves it.
Practical Stuff
Underground Metro Corridors
Since the entire city is being built from scratch, the entire Metro corridor needs to be built underground. This will help keep the city aesthetically appealing. If elevated corridors are built, they should use the 25m segment like what Mumbai Metro 1 and incorporate the cantilever station design of the Hyderabad Metro.
Bus Rapid Transit Systems
Marechal Floriano BRT station, Linha Verde (Green Line), Curitiba RIT, Brazil. Image copyright Mario Roberto Duran Ortiz, CC-BY-SA 3.0 Unported, available on the Wikimedia Commons.
Amaravti has the potential to make Bus Rapid Transit Systems [BRTS] work more efficiently than other cities including Ahmedabad and Surat. It can implement them on a large scale as a feeder system to the aforementioned Metro systems. Again, since the city is being built from scratch, bus lanes can be made signal free, making them truly rapid. Trolleybuses, or even trams can be run to make it more eco-friendly.
Amaravati must ensure that roads are built with proper cycle lanes that are separated from pedestrian lanes and motorised traffic. Encourage the usage of cycles, and incentivise riding them. Public cycles should be introduced. Use a smart card for parking spaces and renting cycles.
Accessibility
Bicycle lane and a pedestrians’ path in Tsurumi, Yokohama, Japan. Image copyright Meme-Meme, CC-BY-SA 3.0 Unported, available on the Wikimedia Commons.
All roads must feature properly laid and leveled pedestrian walkways as well as ramps for the differently-abled. With the Prime Minister stressing on the word Divyang for differently-abled people, it is imperative that this is taken up seriously. Traffic signals must be fitted with audio devices to let visually-impaired people know that they can cross the road. Bus stops should feature Braille signage and pavements should feature a tactile path similar to the one in Metro stations.
Smart Design and Technology
Solar Panels at HUDA City Centre Parking Lot. Image copyright Srikanth Ramakrishan, CC-BY-SA 4.0 International, available on the Wikimedia Commons.
All roads must be designed with ducts for cables, pipelines, and other channels to prevent them from being dug up very often. This is similar to what is done in Mumbai and Bangalore [the latter thru TenderSURE]. Roads should be laid using plastic waste to recycle the waste as well as make the road long lasting. Electric cables should be underground to prevent accidents. Traffic signals, bus stops, footbridges, parking lots, benches, should be fitted with CCTV cameras for safety and security, as well as fitted with solar panels to generate power as well as provide shade.
Common Payment instrument
A super crucial point, a Common Payment Instrument must be instituted across the city. A single smart card should be used for Metro, Buses, BRTS, Cycles, etc. This model is followed abroad in many places. Like several cities abroad, NFC-enabled smartphones can be used as a payment mechanism. As stated earlier for buses, an App could be developed for buses, trains, availability of cycles and payments. Keep it simple silly!
TAXIS and autos
Autos, while seen as a burden on the roads by many, are very crucial. Electric Rickshaws can be mandated to keep the air clean. Similarly, permits should be issued for regular taxis, similar to the Cool Cabs and regular Kaali-Peelis of Mumbai. However, these auto and taxi drivers must be given a loan to purchase a GPS-enabled Fare Meter that can support RFID/NFC payments so that people can use the aforementioned smart cards and phone payment methods. The Transport Department, City Administration and Traffic Police must strictly enforce this however.
Water Transport
Sitting on the banks of the Krishna river, Amaravati can make use of this natural resource. A network of channels can also be built across the city, with boats, similar to Allepy.
Overall, the future of Amaravati seems to be quite bright, with Chandrababu Naidu as the Chief Minister of Andhra Pradesh. I just hope some of these suggestions are taken seriously.
Do share this post. Tweet it out and use the hashtags #SunriseAndhra and #SmartCity so that it can reach the government.
Since time immemorial, cycles have been a very important mode of transport. They are used for various purposes, from acting as a “business hub” in terms of acting as a point-of-sale for tea vendors to the main business vehicle in rural areas. They are used as the main transport vehicle by many, especially in rural and semi-urban areas. In urban and metropolitan areas, they are viewed as a lower class mode of transport.
Cycles acting as a Business Hub. A vegetable Vendor in Sathyamangalam, TN, uses his cycle as his shop. Image copyright Srikanth Ramakrishnan, CC-BY-SA 3.0 Unported, available on the Wikimedia Commons.
In the recent past, several cities in India have tried to popularise cycling in several ways. Among them are Pune, Bangalore and Ahmedabad. While some have succeeded and some have failed, it is worth relooking at cycling for the various benefits it offers.
A board indicating a Cycle Track in Pune. Image copyright Mahendrapatnaik, under the CC-BY-SA 3.0 Unported licence on the Wikimedia Commons.
Pune got cycle lanes around 2008 while the city got a massive overhaul for the Commonwealth Youth Games, under the JnNURM pattern. A few cycle tracks were laid in and around Kothrud and Shivajinagar, while majority of the cycle lanes were laid from Katraj to Swargate to Hadapsar alongside the first BRTS line. These cycle lanes are usable, but they are usually blocked by traffic, pedestrians, or sometimes, hawkers and homeless people.
Bangalore got cycle lanes in 2012. These lanes are prominent in and around Jayanagar, especially under the Metro. These lanes were basically just a section of the road marked with a solid white line with the image of a cycle painted on it, thus not having a physical barrier separating it from regular traffic like the ones in Pune. The net result, they turned into parking spaces for cars.
Mysore too got cycle lanes, but unlike Bangalore, they were physically separated from motorised traffic.
However, a year prior, in 2011, prior to the opening of the first Reach of Namma Metro, Bangalore also got a Public Shared Cycle system, jointly operated by the BMRCL and BBMP. The system was operated by Kerberon Automations under the brand name Atcag. Each cycle was tracked by GPS and required users to pay a one time registration of ₹1000 for a smart card and then use the card as a prepaid card while using the cycles. The first hour was free, after which a nominal rate would be charged. There were 9 cycle stations in the city.
Ahmedabad got a similar system named MyByk, operated by Greenpedia, with cycle stations across several Janmarg stations.
Cycles for use by everyone inside the Infosys Mysore Campus. Image copyright Prateek Karandikar, CC-BY-SA 4.0 Unported, on the Wikimedia Commons.
Now, the success of the public share and ride system is entirely debatable, mainly due to the subscription based nature of the service. The system followed in IT parks like Infosys, or college campuses like the IITs, where a cycle is picked up from the stand and left in another is impractical in public because cycles will get damaged or stolen because the rider is not being held accountable for their actions. Thus, the system of charging users and tracking the cycles, both with GPS and tying it to a user is a necessity.
Now, the main section. How do we implement an effective cycling plan across major cities. For this purpose, I plan to use the Pune Metropolitan Region of Pimpri-Chinchwad and Pune, as well as a part of the Mumbai Metropolitan Region consisting of Mumbai, Navi Mumbai and Thane.
Creating cycle tracks and lanes is one thing, but making it safer for cyclists is more important. Cyclists are on par with Pedestrians. Both are treated badly and often traffic doesn’t bother stopping for them, even with the appropriate traffic signals showing.
Our first target, the PMR.
The Pune Metropolitan region offers immense potential for cycling as a mode of public transport. This, coupled with the fact that Pune has been the undisputed Cycling Capital of India for a long time makes one wonder why the government has not done much to promote cycling. For starters, all the BRTS corridors, from Nagar Road, Nashik Road, Aundh-Ravet Road, Vishrantwadi Road, et al must be given proper cycle lanes. Once this is done, cycle parking must be provided. This can be easily achieved at major bus terminals such as Kiwale and Vishrantwadi, but needs to be given a serious thought at other areas. It can be done with relative ease at Kalewadi Phata and Dange Chowk, both of which have a split flyover, providing the much needed space for the parking. Similarly, parking must be offered at major PMPML bus stations, such as Kothrud, Balewadi, Nigdi, Chinchwad, Corporation, Pune Railway Station, Swargate, Hadapsar, etc, as well as Railway stations like Shivajinagar, Kasarwadi, Akurdi etc. Along with this, last mile connectivity should be provided for those using shared cycles. Docking stations must be provided in residential pockets to encourage their use.
And now, for the MMR.
The situation in the MMR is pretty similar to the PMR. Cycle stations can be provided at all of BESTs Depots, Bus Stations, major junctions such as Rani Laxmi Chowk, Khodadad Circle, Dr. Shyama Prasad Mukherjee Chowk, NSCI Worli, as well as under the various rail-based stations. Cycle stations can be built around the Railway stations as part of SATIS, or under Metro and Monorail stations on the Median with an additional staircase of elevator for cyclists to use. In Thane, Navi Mumbai, it can be implemented along several select areas near Hiranandani along Ghodbunder Road, and at all CIDCO railway stations. It would be a massive boon to have it at CBD Belapur Railway station given the connectivity it will soon receive. A cycle station can be set up under the CBD Belapur flyover as well. Similarly, stations must be built at all present and upcoming Jetties, Ferry Wharf, Gorai Jetty, Belapur Hoverport, etc. Other major areas where they can come up are at SEEPZ in Andheri, Powai, etc.
Bangalore and Chennai
Both these cities should seriously consider providing cycle stations at bus stations, railway stations and Metro stations. This might help fulfill the BMTC Park and Ride Concept.
Now, for the bigger problem. The Cycle Stations themselves. How should they be built and operated:
Ideally, each ‘Cycle Station’, should consist of two parts: One for the public cycles, and for people riding their own.
The former is not a problem, since each user requires a Smart Card. Thus, authentication and security are sorted as both are connected to the card.
The latter, however might turn out to be a bit of a problem. Unlike a regular Pay-and-Park system, Cycles need a little more. Stealing a car, or a motorised two wheeler, is not too easy, whereas here, it is as easy as lifting a box off the ground and then pushing it out. So how do we solve this problem? Simple, we provide a locking mechanism on the cycle stand. But how would you make it work? There are two methods I see for this:
The Old Fashioned Way: Hire a guard or attendant. He gives you a receipt for the parking charge, you park it in the stand, lock it with your own lock and go. You can have a pass system for this. For those who don’t have a lock, provide one against payment of a refundable deposit. Say your parking charge is ₹20 for a day, you charge ₹50 for a chain and lock, upon whose return, you get your money back. You can have a daily-weekly-monthly pass system for this as well. It’s a win-win situation. Print the cyclists photo and a photo of the cycle, specify the date and time details for the pass on a sheet of paper. Just cross the date if it is a daily pass being sold by the vendor. It is as simple as a conductor selling a ticket. But do we really want to go down this path? Especially with Digitisation and eGovernance coming up?
The High-Tech Way: Install cameras for security, but yes, do hire a guard. Every user needs to have a smart card, for single transactions, they can get a token or a single use paper RFID token. The user comes in, locks the cycle with a lock built-into the stand, swipes their card on the sensor and leaves. The money for the parking is deducted from the account balance of the card. For the ones who don’t have a card; keep a machine like the Automatic Ticket Machines at Metro Stations. User slots in the time they intend to park for, insert the money, collect the RFID token or printed ticket, lock their cycle and go. On return, they return/slot-in/swipe the card or token and take their cycles out. This can be a good starter with the BEST prepaid card as the Smart Card.
There is a lot of thinking, planning, redrawing, mapping, innovating to be done to implement this. This will potentially improve and increase the number of cyclists on the roads, which might help reduce traffic jams. We all know how healthy and enjoyable cycling really is. Let us share the joy with those who may not know.
